 |
 |
Set E
|
 |
|
|
|
|
|
Set M
|
 |
|
|
|
|
|
Blade Holder E |
 |
|
|
|
|
|
Blade Holder M |
|
Two applications in one blade holder.
Takes all B or E blades.
|
|
|
|
|
|
E100
|
 |
Excellent for materials with spiral
chips such as aluminium, plastics,
steels, etc.
|
|
|
|
|
|
E100L
|
 |
Left hand version of blade E100.
|
|
|
|
|
|
E100C
|
 |
Carbide for high wear conditions.
|
|
|
|
|
|
E100
|
|
Carbide for high wear conditions.
|
|
|
|
|
|
E100CL
|
 |
Left hand version of blade E100C.
|
|
|
|
|
|
E100D
|
 |
Diamond coated E100 blade used to
break corners in hardened steels,
glass, carbide etc.
|
|
|
|
|
|
E100P
|
 |
Titanium Nitride coated E100 blade for
high wear conditions.
|
|
|
|
|
|
E110
|
 |
The B10's cutting edge on a larger
"E" shaft. Can deburr a minimum
hole diameter of 2 mm (0.08").
|
|
|
|
|
|
E110P
|
 |
Titanium Nitride coated E110 for high
wear conditions.
|
|
|
|
|
|
E111
|
 |
Excellent for aluminium, plastics
& copper. Can deburr a minimum hole
diameter of 1.5 mm (0.06").
|
|
|
|
|
|
E200
|
 |
Ideal for brass, cast iron and other
materials with a powdery chip.
Can deburr in both a clockwise and
counterclockwise direction.
|
|
|
|
|
|
E200C
|
 |
Carbide blade for hardened steels
(from HRc38).
|
|
|
|
|
|
E200P
|
 |
Titanium Nitride coated E200 for
high wear conditions.
|
|
|
|
|
|
E250
|
|
A very thin blade specifically
designed for plastics.
|
|
|
|
|
|
E300
|
 |
Hooked blade simultaneously removes
both external and internal burrs
from holes drilled into steels
and plastics up to 4 mm (0.16") thick.
|
|
|
|
|
|
E320
|
 |
Specially designed for brass &
cast iron. Can deburr in both
clockwise and counterclockwise
directions.
|
|
|
|
|
|
E350
|
 |
Well suited to deburring straight edges,
keyways, etc.
|
|
|
|
|
|
E500C
|
 |
Carbide tipped scriber.
Can be reground.
|
|
|
|
|
|
E600
|
 |
H.S.S. blade can reach inside a wall up
to 20 mm (0.8") thick drilled into
steels & plastics.
|
|
|
|
|
|
E601
|
 |
An even longer version of the E600
blade. For wall thickness of up to
40 mm (1.6").
|
|
|
|
|
|
E700
|
 |
Ideal for removing burrs from workpieces
of plastics & other materials with
spiral chips. Also designed to deburr
& scrape the inside circumference of
thick walled holes and cross holes.
|
|
|
|
|
|
E720
|
 |
As for E700. Specially designed for
metals & plastics with powdery chips.
Can deburr in both clockwise and
counterclockwise direction.
|
|
|
|
|
|
E750
|
 |
Blade specially designed for rubber
deburring.
|
|
|
|
| Back to top |
